PVSW Verzeichnis gefunden

4Antworten
  1. #1
    Avatar von GSB
    GSB ist offline
    Themen Starter

    Title
    Benutzer
    seit
    13.01.2010
    Ort
    Hamburg
    Beiträge
    2

    Standard PVSW Verzeichnis gefunden

    Hallo zusammen, ich bin neu hier. Um mehr Platz auf meiner Festplatte zu schaffen (ich muss defragmentieren, habe aber nur 5% frei) soll ich nicht benötigte Dateien löschen.
    Nun finde ich ein ziemlich volles Verzeichnis C:\PVSW\bin.... Dieses Verzeichnis ist total voll. Wozu gehört es, brauche ich das alles, was ist überhaupt perasive Software ? wer weiß etwas?
    Info wäre nett
    Gaby

  2. #2
    Avatar von Q-Max
    Q-Max ist offline

    Title
    Moderator
    seit
    19.05.2008
    Ort
    Laatzen bei Hannover
    Beiträge
    11.775

    Standard

    Hi,

    ich nehme mal an das du diese Frage:

    ........was ist überhaupt perasive Software ? wer weiß etwas?
    Info wäre nett............
    nach dem Googleversuch "PVSW" stellst.

    Nun ist es so das diese Abkürzung wahrscheinlich nichts mit deinem Ordner zu tun hat, es sei denn du hast irgendeine Börsensoftware installiert.

    Das wäre aber eine so spezielle Software das es bei dir sofort geklingelt hätte und du wüsstest was dieser Ordner zu bedeuten hat.

    Öffne doch einmal den Ordner und schau die Dateien durch. Entweder du findest eine Setup.exe, dann könntest du einen Setup starten und so feststellen was sich dort verbirgt (den Setup kannst du ja jederzeit abbrechen), oder du suchst nach einer *.TXT Datei, die du mit dem Editor öffnen kannst in diesen Dateien finden sich fast immer Hinweise auf den Softwarenamen oder ähnliches, woraus man auf den Zweck schließen kann.

    Zuerst solltest du dir aber das Tool CCleaner laden (Beschreibung unter Freeware hier im Forum) und das Tool mit den voreingestellten Optionen laufen lassen. Du wirst dich wundern wieviel Platz da freigeschaufelt wird.

    Eine Defragmentierung ist erst sinnvoll wenn du die Wartung- und Aufräumarbeiten abgeschlossen hast. Dann lässt du noch einmal den CCleaner laufen und als letztes defragmentierst du.

    LG

  3. #3
    Avatar von GSB
    GSB ist offline
    Themen Starter

    Title
    Benutzer
    seit
    13.01.2010
    Ort
    Hamburg
    Beiträge
    2

    Standard PVSW Datei

    Danke für die schnelle Antwort. Ich habe CClean immer laufen lassen. In dem PVSW Verzeichnis befindet sich eine *.txt Datei. ich habe sie kopiert hier eingestellt
    PHP-Code:
                    Pervasive.SQL 2000i v7.9 DOS Application Support
                                   March 2001
                                   READDOS
    .TXT
    1. Overview
    2. Running DOS applications on Windows NT
    /2000
       
    Using/Disabling Win32 DOS Box Support on Windows NT/2000
       
    Using DOS TCP/IP Support (BREQTCP)
       - 
    Using DOS SPX Support (BREQUEST/BREQNT)
    3. Running DOS applications on Windows 95/98/ME
       
    Using/Disabling Win32 DOS Box Support on Windows 95/98/ME
       
    Using DOS TCP/IP Support (BREQTCP)
       - 
    Using DOS SPX Support (BREQUEST/BREQNT)
    4. Running DOS applications on Windows 3.1 or DOS
       
    Using DOS TCP/IP Support (BREQTCP)
       - 
    Using DOS SPX Support (BREQUEST/BREQNT)
    5. Verifying the DOS configuration

    Appendix A
    DOS TCP/IP Technical Information

    1. Overview

    Pervasive
    .SQL 2000i v7.9 supports DOS Btrieve applications in several
    different ways
    Thishoweverdepends on the current configuration 
    and environment of the workstation.

    The following choices are available:

    Win32 DOS Box supportAllows a DOS application to run in a DOS box
    on a Windows NT 
    or Windows 9x workstationThis enables direct
    communication to the Windows 32
    -bit workstation components rather 
    than to the database engine
    This configuration can be used with 
    either a local Pervasive
    .SQL 2000i workstation or workgroup engine,
    or 
    a remote Pervasive.SQL 2000i server engineThe TCP/IP or SPX 
    protocol supported 
    for client/server access depends on the 
    configuration of the Windows 32
    -bit components.

    DOS TCP/IP requester (BREQTCP): Allows a DOS application to run in 
      any Windows DOS box 
    or on a DOS workstation, and communicate to a 
      remote Pervasive
    .SQL 2000i server engine via the TCP/IP protocol.

    DOS SPX requester (BREQUEST or BREQNT): Allows a DOS application to
      run in any Windows DOS box 
    or on a DOS workstation, and communicate 
      to a remote Pervasive
    .SQL 2000i server engine via the SPX protocol.
    enables DOS application supportThis file is similar to the old 
    to a remote server 
    engine by following these steps
    :
    1. Start a DOS session.
    2. Load BREQNT.EXE or BREQUEST.EXE from the \pvsw\bin directorythis
       needs to be loaded in each DOS session running a Btrieve
       application
    .
    3. Run your application.

    To stop a DOS applicationunload the requester by entering the 
    command BREQUEST 
    /or BREQTCP /u in the DOS box before closing it.

    3. Running DOS applications on Windows 95/98/ME
    To run a Pervasive application on a Windows 95
    /98/ME workstationyou 
    must always install the Windows client components
    These are found on 
    the Pervasive
    .SQL 2000i CD in the \clients\win directoryTypically
    the client installation programs are also installed on your 
    Pervasive
    .SQL 2000i server in the \pvsw\clients\win directory by 
    default.

    After the Windows client component installationyou will have 
    everything you need to run a DOS
    Windows 16-bit, or Windows 32-bit
    application
    The default DOS application support installed is the 
    Win32 DOS Box configuration
    .

    Using/Disabling Win32 DOS Box Support on Windows 95/98/ME 

    NOTE
    Legacy DOS applications must use the BTRBOX configuration on 
    Windows 95
    /98/MEIn factit is the only supported configuration 
    with the Workstation 
    and Workgroup engine productsHoweverwith 
    client
    /server productsyou can run DOS applications with either the
    BTRBOX configuration
    , or the legacy 16-bit DOS requesters.

    If 
    the DOS application is being run on a DOS or Windows 16-bit 
    operating system
    then the legacy 16-bit DOS requesters MUST be used.
    BTRBOX works on Windows32 operating systems only.

    Installation Instructions
    To run a DOS application with the Win32 DOS Box configuration follow 
    these steps

    1. Start BTRBOX95:
       * 
    Select the BtrBox95 icon to launch from the 
       Start
    \Programs\Pervasive\Pervasive.SQL 2000i\Utilities menu
       * 
    Load from the \pvsw\bin directoryA minimized dialog appears
         indicating active support
    You must leave this dialog running.
       
    Closure of this dialog will unload BTRBOX95You will only need to
       run BTRBOX once 
    -- you may have multiple DOS sessions open using a 
       single instance of the driver
    .
    2. Start a DOS session.
    3. Load BDOSSTUB.EXE from the \pvsw\bin directorythis needs to be 
       loaded in each DOS session running a Btrieve application
    .
    4. Run your application.

    NOTEYou MUST reboot after the initial installation of the Windows
    client components in order 
    for the Win32 DOS Box support to function. 
    A device driver (VxDis registered and will not load until reboot.

    The proper order to stop a DOS application is as follows:
    1. Stop the DOS application.
    2. Close the DOS box.
    3. Stop BTRBOX95.

    If 
    you do not follow this orderBTRBOX95 or the database engine may 
    not unload properly
    .

    In situations where stopping and restarting all clients is 
    recommended
    you should perform all three steps aboveSimply 
    stopping 
    and starting your client applications is not sufficient.

    To disable the Win32 DOS box support in order to use the DOS TCP/IP 
    or SPX requesteryou must follow these steps:
    1. Remove the files BTRBOX95.EXEBDOSSTUB.EXE, and BTRBOX95.VXD from
       your system
    these are installed by default in the \pvsw\bin 
       directory
    .
    2. Using REGEDITremove the following key from your registry:
        
    HKEY_LOCAL_MACHINE\
          
    System\
            
    Current Control Set\
              
    Services\
                
    VXD\
                  
    BtrBox95
    Note
    Each configuration (Win32 DOS BoxDOS TCP/IP and DOS SPX 
    Support
    is mutually exclusiveYou must disable the existing 
    configuration before configuring your machine 
    for new configuration.

    NOTEEditing your registry is dangerous and can cause you to 
    reinstall your entire computer
    . If you do not feel comfortable doing 
    this
    please obtain the services of a qualified technicianPervasive 
    Software can accept no responsibility 
    for a damaged Registry.

    Using DOS TCP/IP Support (BREQTCP)
    ----------------------------------
    To use the DOS TCP/IP requester on a Windows 9x workstation you must 
    first disable the Win32 DOS Box support 
    as described above, and then 
    enable the DOS TCP
    /IP requester configuration using the following 
    steps
    :

    1. Ensure you have the following five files in your PVSW\BIN
       directory
    These files are installed as part of the clients\win
       installation
    Make sure PVSW\BIN is included in your path.
        
    BREQTCP.EXE
        BREQTCP
    .MSG
        JSBDOSWS
    .VXD
        MSOCKLIB
    .RC
        VSLDOS
    .INI

    4. Running DOS applications on Windows 3.1 
    or DOS

    DOS Btrieve application support on Windows 3.1 
    or DOS workstations is 
    only available through the DOS TCP
    /IP or DOS SPX requestersBoth 
    allow a DOS application to communicate to a Windows NT
    /2000 or 
    NetWare server running the client/server version of Pervasive.SQL 
    2000i
    .

    Using DOS TCP/IP Support (BREQTCP)
    ----------------------------------
    To use the DOS TCP/IP requester on a DOS or Windows workstationyou 
    must have one of the following TCP
    /IP stacks:
    Microsoft LAN Manager
    Novell LAN Workplace
    FTP Software 2.2 or greater

    You can enable the DOS TCP
    /IP requester configuration using the 
    following steps
    :

    1. Copy the following files to the target directory; if you are 
       running Windows 3.x
    the target directory is the %windir%\SYSTEM 
       directory
    . If you are running DOS onlythe target directory is 
       the directory where you installed the Pervasive
    .SQL DOS client 
       software
    These files can be found in the clients\dos directory on 
       your Pervasive
    .SQL 2000i CD or in the PVSW\Clients\DOS directory 
       of a Pervasive
    .SQL 2000i server.
       
    BREQTCP.EXE
       BREQTCP
    .MSG
       M3OPEN
    .EXE
       MNOVLWP
    .EXE
       MFTP22
    .EXE
       MSOCKLIB
    .RC
       VSLDOS
    .*    
    2. Rename your VSLDOS file to VSLDOS.INI in your target directory.

       If 
    your TCP stack is         Rename this file to VSLDOS.INI
       
    ----------------------       ------------------------------
       
    Microsoft LAN Manager        VSLDOS.M3
       Novell LAN Workplace         VSLDOS
    .LWP
       FTP Software                 VSLDOS
    .FTP
    3. Edit AUTOEXEC
    .BAT file located in the root directoryAdd the 
       following line to the file
    :
       
    SET VSL=[jsb-location]

       
    where [jsb-locationis the fully-qualified path of the directory
       where you placed the VSLDOS
    .INI file. For example
       
    C:\WINDOWS\SYSTEM if you use Windows 3.x or C:\PVSW\BIN for DOS.
    4. Restart the computer to register the AUTOEXEC.BAT changes.

    Once the DOS TCP/IP requester is setupfollow these steps to run a 
    DOS application
    :
    1. Make sure your TCP/IP components are loaded, as described by your 
       TCP
    /IP stack provider.
    2. Run the JSB executable appropriate for your TCP stack:
       - 
    M3OPEN.EXE  (Microsoft)
       - 
    MNOVLWP.EXE (Novell)
       - 
    MFTP22.EXE  (FTP)
    3. Load BREQTCP.EXE.
    4. Run your application.

    ** 
    VENDOR-SPECIFIC NOTES **

    MICROSOFT LAN MANAGER
    ---------------------
    1. Ensure that the NUMSOCKETS parameter in the [SOCKETSsection of 
       TCPUTILS
    .INI is set to the maximum concurrent number of 
       connections required
    .
    2. SOCKETS.EXE is a Terminate and Stay Resident (TSRprogram that 
       allows applications to 
    use the Microsoft LAN Manager TCP/IP stack
       
    SOCKETS.EXE must be located in the same directory as the other 
       Microsoft LAN Manager TCP
    /IP executable.

    NOVELL LAN WORKPLACE
    --------------------
    Using Novell's LAN Workplace for DOS with BREQTCP.EXE requires that 
    the environment variable EXCELAN be set to the Novell base directory. 
    For example, if you installed LAN Workplace in the C:\NET directory, 
    do a SET EXCELAN=C:\NET prior to loading MNOVLWP.EXE and BREQTCP.EXE.

    FTP SOFTWARE
    ------------
    1. Ensure that you allocate enough TCP and packet buffers for your 
       application within the FTP kernel.
       For example, '
    kernel-name' -t 16 -p 20  allocates 16 TCP 
       connections and 20 packet buffers.
    2. Once the maximum number of connections is reached, it may prove 
       difficult to effect any connection thereafter until all, or almost 
       all, connections have been closed. You are therefore recommended 
       to set the maximum number of connections to a high number.

    To stop a DOS application, unload the requester components by 
    entering the command BREQTCP /u at the DOS prompt, followed by 
    [JSB executable] /U, where [JSB executable] is either M3OPEN.EXE,
    MNOVLWP.EXE, or MFTP22.EXE. If running in a Windows DOS box, unload 
    the requester components before closing the DOS box.

    Using DOS SPX Support (BREQUEST/BREQNT)
    ---------------------------------------
    There are two DOS SPX Btrieve requesters. BREQNT.EXE is the "dual 
    mode" requester that can be used by a DOS application to communicate
    to either a Windows NT/2000 or a NetWare server. BREQUEST.EXE is a 
    NetWare-only version of the DOS SPX requester. This exists for 
    historical purposes before Windows NT support was available, and is 
    still provided because it has a smaller memory requirement than 
    BREQNT. If you are accessing Pervasive.SQL on a NetWare server and if 
    you are running low on DOS conventional memory, you may need to use 
    BREQUEST. If you are accessing a Windows NT server, you must use 
    BREQNT.

    A DOS application can be run with the SPX protocol to a remote server 
    engine by following these steps:
    1. At a DOS prompt, load BREQNT.EXE or BREQUEST.EXE from the 
       \pvsw\bin directory; this needs to be loaded in each DOS session
       running a Btrieve application in a Windows environment.
    2. Run your application.

    To stop a DOS application, unload the requester by entering the 
    command BREQUEST /u or BREQTCP /u in the DOS box before closing it.

    =====================================================================
    5. Verifying the DOS Configuration
    ==================================
    To verify that the install completed successfully, you need a pure 
    DOS Btrieve application. One of the simplest application ships with 
    the server engines. You will find BUTIL.EXE in the PVSW\Clients\DOS 
    directory. Running this command by itself will show a list of 
    available commands. Do this one time to ensure the copyright 
    information says Butil for DOS, not Windows NT. You will then want to 
    access a Btrieve file. You can use the BUTIL -STAT command to do 
    this. If the command completes successfully, your DOS support is 
    functioning as designed.

    Try a command like this:

       BUTIL -STAT f:\pvsw\samples\sample.btr

    Here, "f:" is a drive letter mapped to your server and
    "f:\pvsw\samples\sample.btr" is the path and filename of an existing
    Btrieve data file. A successful completion will return information 
    about the data file. Otherwise, you will see a status code indicating 
    the problem. Pervasive Technical Support can help you resolve any 
    problems.

    =====================================================================
    Appendix A: DOS TCP/IP Technical Information
    ============================================
    BREQTCP.EXE is a DOS executable that runs on various DOS and Windows 
    platforms. It is built using JSB Corporation'
    s Virtual Socket Library 
    (VSL). VSL implements an API based on the Berkeley 4.3 sockets 
    standard that enables development of platform
    -independent and 
    transport-independent network applications. For information about JSB 
    Corporation
    visit their site at http://www.jsb.com.

    COMPONENTS OF THE BTRIEVE TCP/IP REQUESTER
    ------------------------------------------
    DOS TCP/IP Requesters BREQTCP.EXEBREQTCP.MSG
    VSL DOS components M3OPEN.EXEMNOVLWP.EXEMFTP22.EXE
    VSL Windows 95/98/ME Components JSBDOSWS.VXD
    VSL Windows NT/2000 Components JSBDOSWS.EXEJSBDOSWS.DLL
    VSL Platform specific configuration files VSLDOS.INIVSLDOS.M3
      
    VSLDOS.LWPVSLDOS.FTP
    VSL Multiplatform resource file MSOCKLIB.RC

    SYSTEM REQUIREMENTS 
    FOR BTRIEVE TCP/IP REQUESTER
    ------------------------------------------------
    Server software requirements
    Pervasive.SQL 2000i
    TCP/IP configured correctly at server

    You must have one of the following client operating systems
    :
    Windows NT 4.0 or greater
    Windows 95/98/ME
    DOS 5.0 or greater
    Windows 3.1 or Windows For Workgroups

    For DOSyou must have one of the following TCP/IP stacks:
    Microsoft LAN Manager
    Novell LAN Workplace
    FTP Software 2.2 or greater

    Conventional memory required to load with defaults
    --------------------------------------------------
    Windows NT/2000
        
    BREQTCP.EXE   81984 
        
    JSBDOSWS.EXE  30400 (Upper memory)
    Windows 95/98/ME
        
    BREQTCP.EXE   85792
        
    JSBDOSWS.VXD      0 (No conventional memory used)
    DOS 5.0 or greater
        
    BREQTCP.EXE   81456
        
    M3OPEN.EXE    43280 (Microsoft LAN Manager)
        - 
    MNOVLWP.EXE   66880 (Novell LAN Workplace)
        - 
    MFTP22.EXE    69424 (FTP Software PC/TCP

    ACCESSING NETWARE SERVERS
    -------------------------
    You must have your Pervasive.SQL server IP address configured 
    properly on your clients 
    for Pervasive.SQL to function. There are two 
    ways to 
    do this.

    To configure your clients to use the server's IP address, do one of 
    the following:

    *1. In Windows, click Start and point to Control Panel.
     2. Select Network.
     3. Select TCP/IP and click Properties.
     4. Click the DNS tab.
     5. Enable DNS and enter the appropriate server information.

    *Enter your Server IP address/name in the \ETC\HOSTS file.

    *Verify correct configuration using the TCP/IP '
    ping' to ping the 
     server by name.

    *Note that BREQTCP will return Btrieve status 20 if it is unable to 
     resolve the server name into an IP address, or if the IP address is 
     incorrect or unreachable.

    KNOWN ISSUES
    ------------
    This section contains notes on technical issues.

    1. Multiple DOS Boxes

    When running BREQTCP on Windows 95/98/ME, only one DOS box is 
    supported. Unloading BREQTCP is not sufficient to release the JSB 
    VxD. The DOS box must be closed before another DOS box can load 
    BREQTCP.

    On Windows NT/2000, there is no restriction on the number of DOS 
    boxes that can be invoked.

    2. Use of DOS Requesters on the Windows NT/2000 platform

    There are some configuration requirements when you use the DOS 
    Requester (BREQTCP, BREQNT or BREQUEST) with Windows NT/2000.

    *To run a DOS application using the DOS requester in a Windows 
    NT/2000 DOS box to access a NetWare server, NW16.EXE must be loaded
    prior to loading BREQTCP. Pervasive  Software recommends you load it 
    from AUTOEXEC.NT. If the NWLink IPX/SPX compatible transport is 
    installed, these files are located in the WINNT\SYSTEM32 directory.

    *DOS applications are not supported through the DOS Requester when 
    running on the Windows NT/2000 server where the data files you are 
    trying to access reside. You must use the Win32 DOS Box Support as 
    installed by Pervasive.SQL 2000i to access local files.

    3. IP Address caching in Windows 95/98/ME

    After adding a target IP address for a NetWare server in the local
    Windows 95/98/ME hosts file, BREQTCP must be unloaded and reloaded.

    After correcting a target IP address for a NetWare server in the 
    local Windows 95/98/ME hosts file, the Windows 95/98/ME system may 
    need to be restarted to restart the JSB VxD.

    BREQTCP caches both valid and invalid IP addresses while the JSB VSL 
    VxD caches valid IP addresses. The result is that modifications to 
    the hosts file will not affect BREQTCP and may not affect the JSB VSL 
    VxD depending upon prior attempts cached. This can be confusing when 
    you are trying to modify a target IP address in the local host'
    s file 
    or on a DNS server
    Note that the Windows 95/98/ME 'ping' utility does not exhibit this 
    behavior
    so ping may work while BREQTCP requires that Windows 
    95
    /98/ME be restarted.

    4. Diagnosing BREQTCP.EXE initialization failures

    You may receive the following error message when loading 
     BREQTCP
    :

     
    BREQTCP-10The function InitSocketLibrary returned an error.

    If 
    you see this messageyou can determine the cause by using this 
    checklist
    :

    aVerify that the JSB VSL components appropriate to your workstation 
       are loaded
    Refer to the "Using DOS TCP/IP Support (BREQTCP)" 
       
    section for your operating system for instructions on loading the 
       JSB VSL components
    .
       
    bVerify that you set the VSL environment variable to the directory 
       where you placed the VSLDOS
    .INI file.
    cVerify that the VSLDOS.INI you are using is correctYou should 
       copy the appropriate VSL platform specific configuration file into 
       your installation directory 
    and renamed it VSLDOS.INIIt is not 
       necessary to modify the VSLDOS
    .INI fileRefer to the "Using DOS 
       TCP/IP Support (BREQTCP)" 
    section for your operating system to 
       find the correct version of the configuration file 
    for your 
       platform
    .
    dOn Windows 95/98/MEensure another DOS box using BREQTCP is open
    This is the multiple DOS box condition described above.

    =====================================================================
    (
    cCopyright 2001 Pervasive SoftwareAll rights reserved.
    ======================= 
    End of READDOS.TXT ========================== 
    weiß immer noch nicht mehr..?

  4. #4
    Avatar von schmidtchen
    schmidtchen ist offline

    Title
    Moderator
    seit
    07.08.2005
    Ort
    Schleswig-Holstein
    Beiträge
    9.271

    Standard

    Moin,
    ist das:
    C:\PVSW\bin....
    wirklich der Anfang des Pfades, wo dieses Wunderkind zu finden ist?
    Schreib noch mal den kompletten Pfad ab.
    Einerseits ist Q-Max schon auf dem richtigen Dampfer mit 'Finanztool'
    andererseits müsstest du es als eine solche Finanzsoftware kennen.
    Dann müsste es aber unter C:\Programme\........
    sein.
    Ich bin noch nicht so lange mit PC beschäftigt, dass ich mich mit DOS-Programmen auskenne und ob man es einfach löscht - statt wie heute üblich -deinstalliert. Besonders aktuell (2001) und brauchbar scheint es aber nicht zu sein.

  5. #5
    Avatar von Q-Max
    Q-Max ist offline

    Title
    Moderator
    seit
    19.05.2008
    Ort
    Laatzen bei Hannover
    Beiträge
    11.775

    Standard

    Hi,

    dabei handelt es sich scheinbar um eine Client/Server-Software. Zu mehr reichen meine Englischkenntnisse nicht.

    siehe hier: Application Support for PeachTree from Goldstar Software Inc.


    Wenn du als Besitzerin des Pcs nichts damit anfangen kannst - hau es einfach von der Platte, dann ist es unnütz für dich.

    LG

Ähnliche Themen

  1. PDM Keylogger gefunden

    Von suse im Forum Antivirus und PC Sicherheit
    Antworten: 1
    Letzter Beitrag: 12.07.2013, 14:51
  2. Einsprungpunkt nicht gefunden

    Von gentleman im Forum Anwendersoftware
    Antworten: 3
    Letzter Beitrag: 29.07.2009, 11:42
  3. Komische Anwendung gefunden

    Von pipo im Forum Windows Vista
    Antworten: 7
    Letzter Beitrag: 19.02.2009, 00:48
  4. Trojaner gefunden?

    Von Wollsocke im Forum Antivirus und PC Sicherheit
    Antworten: 2
    Letzter Beitrag: 12.01.2008, 12:43
  5. Festplatte nicht gefunden

    Von wolfgang im Forum Festplatten und Laufwerke
    Antworten: 5
    Letzter Beitrag: 11.10.2007, 23:34
Diese Seite benutzt Cookies Durch die weitere Nutzung der Seite stimmen Sie der Verwendung von Cookies zu. Infos zum Datenschutz